Chimney Advice · Warrington

Replacing a GRP Chimney Stack: What Comes Off, What Goes On

Replacing a moulded stack is lighter work than rebuilding brick, but the order matters. This walks through survey, removal, the timber below, the new moulding and the weathering, with questions to ask.

★ 5.0 from 74 Google reviews
✓ Repointing, flaunching, leadwork & pots
✓ Fully insured
✓ Free written quotations
✓ Chester, Cheshire & Wirral
Home › Chimney Repairs › Chimney Repairs Warrington › Replacing a GRP Chimney Stack: What Comes Off, What Goes On
The short version
  • Replacement starts with a survey of the kerb, the roof and what the flue below is doing.
  • The pipe inside is the installer’s concern; the moulding, kerb and weathering are ours.
  • The timber kerb and fixings decide how well the new moulding stays put.
  • The base is weathered in lead, not left to a bead of mastic.
  • A written quotation should name what comes off, what goes on and what is excluded.

Starting with a survey

Replacement begins before anything is touched, with a look at what is really there. The aim is to establish whether the moulding is the only problem, or whether the kerb below it, the lead at its base or the tiles around it are also at fault. From the ground and from a scaffold platform, it is possible to see how the unit is fixed, how it is weathered and whether the shell has moved out of true.

The flue inside is the other half of the survey. A moulded stack is usually a shell around an insulated twin-wall pipe, and that pipe is not ours. Whether the appliance is in use, who fitted the system and whether the installer needs to be present on the day are all worth settling beforehand. We also ask whether the flue is still wanted at all, since a disused one changes the options, as covered in Capping a Flue You No Longer Use, and Why Sealing It Solid Causes Damp.

The survey also settles access. Tight plots, block paving and a resin drive affect where the scaffold goes and what it stands on, and a platform on the pavement needs a licence from the council. Sorting that early keeps the roof from being open any longer than necessary.

What comes off

The old moulding is held down by straps or screws to a timber kerb, with a weathering skirt at its base. First the weathering is stripped back, then the fixings are released, and then the shell is lifted away. It is lightweight, which is the point of it, but it is also thin and awkward in the wind, so the lift is planned and the pipe inside is protected. A moulding that has to slide up over the terminal needs the terminal dealt with first, and that is a job for the installer.

If the shell cannot be removed without the pipe being disturbed, the work stops at that point until the installer has done what is needed. We do not lift, shorten or separate the flue ourselves. In practice that means agreeing the order of the visits so the roof is left weathertight at the end of each day, rather than open between trades.

Once the shell is off, the roof gets a proper look. The tiles around the base, the underlay and the lead are all visible, often for the first time. That is when hidden damage tends to show: wet or soft timber, stained underlay, a dribble of water that has been running down inside the old shell for a long while.

The kerb and the fixings

A moulded stack sits on a timber kerb, a frame built off the rafters to carry it and keep it square. In sound condition it is solid, level and well fixed. Often it is none of those, because water running down the inside of a split shell soaks it for years. Rot in the kerb is the main reason a new moulding fitted to an old frame fails. It is checked by probing and by looking at the rafters it is fixed to.

Where the timber is sound, it is packed and levelled, and the new fixings are made up with load-spreading washers. If the timber has gone, the kerb is repaired or renewed, which may involve trimming into the rafters, and that takes longer than people expect. This is the work that the new moulding’s life depends on. It is also the part that nobody sees afterwards, so it is worth asking about directly.

The moulding should never be used as a hold or fixing point for anything else. Aerial brackets, dishes and ladders concentrate load on a thin shell over empty space. If a bracket is needed, it belongs on the house, not on the stack.

What goes on

The new moulding is offered up, checked for plumb and for the line of its pattern against the neighbours, then fixed to the kerb. Colour and brick pattern are chosen to match the house as closely as the available range allows, and a fresh unit will look brighter than the weathered tiles for a while. The pipe inside is then left as the installer wants it. We do not claim to match every pattern, and it is better to see a sample than to guess.

The base is weathered next. The skirt of the moulding is covered by a lead apron and side flashings dressed into the tile covering, with the upstand turned up behind the moulding’s lower edge. This replaces the bead of mastic that so often fails first. Why lead is preferred is explained in Lead Flashing or a Cement Fillet? How to Tell Which You Have. The collar round the terminal is then re-formed or renewed so that water is thrown clear.

At the end the junction is looked over for gaps, the tiles are made good, and the scaffold is struck. The result should be a stack that is plumb, firmly fixed and weathered in metal. If the pipe needs a final check from the installer, that is arranged separately and the roofing is left ready for it.

What to ask before you agree

Ask what exactly comes off and what goes on, who deals with the flue, what happens to the kerb if it turns out to be rotten, and how the base will be weathered. A sensible quotation names these items, and names what is excluded. What Should Be on a Chimney Repair Quotation? covers the other points worth checking, including scaffold and making good.

Replacement is not always the answer. Sometimes the moulding can be repaired, sometimes the flue is redundant and the stack can come off altogether with the roof closed up, and sometimes a brick stack is wanted in its place, which is a larger job, as Repoint, Rebuild or Remove? How the Decision Gets Made sets out. Quotations are free and in writing, we are fully insured, and we can talk through chimney repairs in Warrington roofs from a photograph taken from the garden. Please do not go up to look.

Not sure what you are looking at? Describe it and we will tell you what it is likely to be — 07464 259566, WhatsApp, or Evensbuddy@yahoo.com. If water is coming in now, please call rather than email.
FAQs

Common Questions

How long will the roof be open during replacement?
As little as the work allows. The old shell comes off and the new one goes on with the kerb checked between, and the base is weathered before we leave. If the pipe needs the installer’s attention, the visits are ordered so the roof is closed in at the end of each day.
Do I have to use the same pattern and colour again?
Not necessarily. Moulded stacks come in different patterns and colours, and the aim is the closest match to the house. A sample is better than a catalogue picture, because a new unit looks brighter than the weathered roof around it for a while.
Can you take the stack off and not replace it?
Where the flue below is no longer used, yes, the moulding and kerb can come off and the roof be closed up. Whether the flue is truly redundant and what is done to the pipe inside is for a HETAS or Gas Safe registered installer to confirm.
What if the timber underneath turns out to be rotten?
Then it is repaired or renewed before anything new goes on, because a new moulding on a rotten kerb will not stay fixed. A good quotation says how that will be handled and how any extra work is agreed with you before it is done.
More Advice

Other Chimney Guides

More from the Warrington chimney series, then the wider guides.

Where We Work

Chimney Repairs Across Cheshire & the Wirral

Every town has its own page, written around the stacks that are actually on the roofs there. Start with the main chimney repairs page.

Customer Reviews

What Our Customers Say

5.0
★★★★★
74 Google reviews
★★★★★

“Excellent work replacing ridge tiles, repointing chimney and repairing flashing. Also fixed other broken tiles. Clean and tidy job. Would definitely recommend.”

Neil
★★★★★

“The guys did a great job in repairing our chimney. They were reliable, friendly and efficient. Buddy kept me in the loop throughout the whole process and I would not hesitate to use Roofline again!”

Hollie Furnival
★★★★★

“Highly recommend. Very quick and efficient. Great communication. Went above and beyond to work the weekend to complete the work that needed to be done. Very happy with the results.”

Karen Jones

Leave Roofline Solutions a Google review →

Free Quotation

Tell Us About the Chimney

Describe what you can see and roughly where you are, and we will come back to you — usually the same day. If water is coming in now, please call instead.

Prefer to talk? Call 07464 259566 · WhatsApp 0044 7464 259566 · Email Evensbuddy@yahoo.com

Find Us

Roofline Solutions, Elton, Chester

We cover Chester, Cheshire, the Wirral and Flintshire from Elton, just north of Chester.

Where We Are

2 Manley View
Elton
Chester
CH2 4QF

Almost all of our work happens at your property rather than here, so please call before travelling.

Opening Hours

Monday – Friday — 24hrs — Emergency Call-Outs
Saturday — 8:00 – 19:00
Sunday — 8:00 – 19:00

Weekday emergency call-outs are answered around the clock. Weekend cover is 8:00 to 19:00.